How to Measure for a New Fire Surround
Share
Getting the size right is the most important part of buying a fire surround. A surround that's too small looks lost on the chimney breast, and one that's too big can overpower the room. The good news is that you only need a tape measure and five minutes, and we check every size with you before we make anything.
The five measurements on our diagrams
Every fire surround on our site has a dimensions diagram under the photos. These are the measurements it shows:
- A – shelf width: the full length of the shelf, end to end.
- B – overall height: from the floor (or the top of your hearth) to the top of the shelf.
- C – opening width: the gap between the inside edges of the legs.
- D – opening height: from the bottom of the opening to the underside of the fascia.
- E – width at the floor: from the outside of one leg to the outside of the other.
Start with your hearth
If you're keeping your existing hearth, measure its width first. The surround stands on the hearth, so the hearth needs to be wider than the E measurement. How much space you leave either side is up to you. As a guide, on a standard 54" hearth we'd suggest an E measurement of no more than 52", although some customers prefer to take it right to the edge.
Then check the chimney breast
Measure the width of your chimney breast. The shelf (A) is usually the widest part of the surround, so make sure it fits with a little wall showing on each side. On a narrow chimney breast, we'd leave at least half an inch either side of the shelf.
Check the opening suits your fire
If you already have a fire, measure it. The opening (C and D) needs to suit the fire, and for most inset fires the surround sits around a back panel. If you're not sure, send us the make and model and we'll check it for you.
When made to measure makes sense
If none of our standard sizes fits, we can make any of our surrounds to your sizes. Start with the measurement that matters most, such as the hearth, the gap in the carpet where your last surround stood, the chimney breast or the fire opening. If you change the width, we add or take away the same amount on each width measurement (A, E and C). For the height, we usually change it by about half the amount you've changed the width, so the surround keeps its proportions.
Made to measure costs £95 for surrounds up to 1524mm wide, or £190 up to 1651mm. Wider than that, we'll give you a quote. On every product page you can choose Made to measure in the Size step, then type in your sizes or use the sliders and watch the drawing change.
We always check before we make it
Don't worry about getting it perfect. We never start a made to measure surround until we've spoken to you, and we'll go through every size on the phone. You can also email photos of your fireplace to contact@firesandsurrounds.co.uk, or call us on 01422 250 723, Monday to Friday, 10am to 4pm.
Plan your sizes with our made to measure planner · Read the full buyer's guide